MAIN TECHNOLOGICAL PARAMETERS IN THE CONTROLLING OF TECHNOLOGICAL PROCESSES
Keywords:
technological parameters, process control, industrial automation, temperature control, pressure regulation, flow rate management, concentration control, material properties, energy efficiency, industrial processes, automation systems, process optimization.Abstract
This research investigates the key technological parameters that influence the control of industrial processes, with a focus on temperature, pressure, flow rate, concentration, and material properties. The study employs a mixed-methods approach, combining quantitative surveys and qualitative interviews with industry professionals to explore the significance of these parameters in improving process efficiency, product quality, and energy consumption. Key findings indicate that while traditional control methods remain prevalent in many industries, there is significant potential for improvement through the adoption of advanced technologies such as predictive control and automation systems. Challenges, including integration with legacy systems and the need for a skilled workforce, were also identified as barriers to the full optimization of technological processes. The study suggests that industries must prioritize automation, workforce training, and energy-efficient control technologies to stay competitive in the evolving industrial landscape.
References
1. Djuraev, K., Yodgorova, M., Usmonov, A., & Mizomov, M. (2021, September). Experimental study of the extraction process of coniferous plants. In IOP Conference Series: Earth and Environmental Science (Vol. 839, No. 4, p. 042019). IOP Publishing.
2. Abduraxmonov, O. R., Soliyeva, O. K., Mizomov, M. S., & Adizova, M. R. (2020). Factors influencing the drying process of fruits and vegetables. ACADEMICIA:" An international Multidisciplinary Research Journal" in India.
3. Mizomov, M. S. (2022). Analyzing Moisture at the Drying Process of Spice Plants. Texas Journal of Agriculture and Biological Sciences, 4, 84-88.
4. Mizomov, M. (2025). ANALYZING TECHNOLOGICAL PROCESSES WITH MAIN TECHNOLOGICAL PARAMETERS. International Journal of Artificial Intelligence, 1(3), 120-124.
5. Mizomov, M. (2025). RESEARCHING HIGHER EDUCATIONAL ACTIVITIES AROUND UNIVERSITIES. Journal of Applied Science and Social Science, 1(2), 284-291.
6. Mizomov, M. (2025). REVISITING STRATEGIES FOR IMPROVING ORGANIZATIONAL MECHANISMS. Journal of Applied Science and Social Science, 1(1), 364-370.
7. Mizomov, M. (2025). ANALYZING DRYING PROCESS OF SPICES USING THE LOW TEMPERATURE. Journal of Applied Science and Social Science, 1(1), 645-651.
8. Djurayev, K., & Mizomov, M. (2024). Optimizing the efficient transport of mass from alternative energy sources and the process of heat and mass exchange during the processing of spices. YASHIL IQTISODIYOT VA TARAQQIYOT, 2(3).
9. Khudoynazarov, F. J., Djuraev, H. F., Mizomov, M. S., & Fayziev, A. K. (2024, February). Development of an optimal mechanism for a solar-air collector for drying thermolabile products. In Journal of Physics: Conference Series (Vol. 2697, No. 1, p. 012015). IOP Publishing.
10. Mukhammad, M. (2024). THE MAIN TECHNOLOGICAL PARAMETERS IN THE PROCESS OF DRYING HERBS: HUMIDITY AND TEMPERATURE CONTROL. Universum: технические науки, 5(9 (126)), 17-20.
11. Расулов, Ш. Х., Джураев, Х. Ф., Увайзов, С. К., Мизомов, М. С., & Файзиев, А. Х. РАЗРАБОТКА ОПТИМАЛЬНОГО МЕХАНИЗМА ПЕРЕМЕЩЕНИЯ ТЕПЛО–И МАССОПЕРЕНОСА В ПРОЦЕССЕ СУШКИ. ЖУРНАЛИ, 113.
12. Siddikov, I. K., Fayziev, S. I., Ismoyilov, K. B., & Uvayzov, S. K. (2020). Synthesis of the neuro-fuzzy adaptive control system of a dynamic object. The Journal of Test Engineering and Management, 83, 11236-11246.
13. Xayrulla, D., Saidjon, U., & Azamat, M. (2021). DEVELOPMENT OF LIGHTING CONTROL SOFTWARE FOR “SMART CLASS”. Universum: технические науки, (5-6 (86)), 18-21.
14. Musaeva, R. X., Uvayzov, S. K., Musaeva, N. X., Qo'ldosheva, F. S., & Akramov, D. R. (2020). Research and experimental determination of thermo physical propertiesof highly foaming solution. International Journal of Psychosocial Rehabilitation, 24(6), 4611-4620.
15. Djuraev, K., & Uvayzov, S. (2023). Synthesis of a digital PID controller to control the temperature in the agricultural products drying chamber. In E3S Web of Conferences (Vol. 390, p. 03002). EDP Sciences.
16. Кулдашева, Ф. С., Шарипова, Н. Р., & Увайзов, С. К. (2019). Проект лабораторной установки управления уровнем жидкости на основе микропроцессорной технологии. In ТЕХНИКА И ТЕХНОЛОГИИ: ПУТИ ИННОВАЦИОННОГО РАЗВИТИЯ (pp. 205-210).
17. Джураев, Х. Ф., & Увайзов, С. К. (2019). Современные информационные технологии в образовании. In Современные материалы, техника и технология (pp. 160-163).
18. Xalikovna, M. R., Xamidovna, M. N., & Komilovich, U. S. (2021). Experimental Determination Of The Boiling Point Of Tomato Paste. Turkish Journal of Computer and Mathematics Education, 12(13), 1274-1278.
19. АЧИЛОВА, Ш. И., & УВАЙЗОВ, С. К. (2017). РАЗРАБОТКА АРХИТЕКТУРЫ АВТОМАТИЧЕСКОГО УПРАВЛЕНИЯ РЕАКТОРОМ ПРОЦЕССА ИЗОМЕРИЗАЦИИ. In МОЛОДЕЖЬ И СИСТЕМНАЯ МОДЕРНИЗАЦИЯ СТРАНЫ (pp. 138-143).
20. УВАЙЗОВ, С. К., ИБРАГИМОВ, Ш. Р. У., & КУЛДАШЕВА, Ф. С. (2017). АВТОМАТИЗАЦИЯ РЕАКЦИОННОГО БЛОКА УСТАНОВКИ ПОЛИЭТИЛЕНА ВЫСОКОГО ДАВЛЕНИЯ. In МОЛОДЕЖЬ И СИСТЕМНАЯ МОДЕРНИЗАЦИЯ СТРАНЫ (pp. 255-259).